Embedded Control Card is custom designed with Zynq 7000 SOC (XC7Z020-2CLG400I) chip which has dual core ARM Cortex-A9 based processing system (PS) and 28 nm Xilinx Programmable logic (PL). ERC board consists of DDR, Serial Flash, Ethernet controller, Crystal oscillators, Reset, Power supply unit and Transceivers (buffers)
With the Development Board, you can use the Zynq-7000 MP Soc’s tightly connected ARM® processing system and 7-Series programmable logic to construct innovative and powerful designs.
Because of the board’s comprehensive combination of on-board peripherals and extension capabilities, it is appropriate for both beginner and experienced designers.
Length: 149 mm
Height: 151 mm
Thickness (+/-5%): 1.6mm
Operating Environmental Temperature: -45°c to +85°c
Configuration
Onboard configuration circuitry
QSPI Flash: Yes
SDIO Card Interface (boot)
Memory
Quad-SPI Flash: 256Mb
DDR3: 1GB
EEPROM: 4 KB
Communication
Gigabit Ethernet GMII, RGMII and SGMII
USB OTG 1 (PS) – Host USB
USB UART (PS)
Control & IO
Programmable IO Lines: 30
Expansion Connectors
Headers & Wire Housings WR-WTB 2mmMale Dual 16Pin Connectors
Clocking
50MHz Fixed PL Oscillator
33.33 MHz Fixed PS System Oscillator (Single-Ended CMOS)
Power
+5V Regulator: Yes
Programmable Logic Cells: 85K
Block RAM: 4.9 Mb
DSP Slices: 220
Maximum IO Pins: 200
Length | 138.5mm |
Height | 92.6mm |
Thickness (+/-5%) | 1.6mm |
Operating Environmental Temperature | -45◦C to +85◦C |
JTAG | Yes |
SPI | Yes |
QSPI | Yes |
UART | Yes |
DDR3 | 4Gb (256M x 16) |
Quad-SPI Flash | 128Mb |
EEPROM | 4Kb |
IO Lines >> 100
D-Sub Connectors >> 2
Standard Clock Oscillator >> Yes
+5V Regulator >> Yes
Featuring the 4 Channel Data Acquisition Card – Zynq 700 Soc(XC7Z045-2FFG900I)
Programmable Logic Cells | 28K |
Block RAM (36 Kb Blocks) | 2.1 Mb (545) |
DSP Slices | 900 |
Look-Up Tables (LUTs) | 17,600 |
Maximum IO Pins | PS IO’s – 128 PL IO’s – 125 |