The Quad Channel customized ADC Board designed with 2 ADS54J60 high– speed JESD204B interface ADCs.
The Board also includes an onboard clocking solution (LMK04828), transformer coupled inputs, full power solution, and easy-to-use software GUI and USB interface.
The Quad channel Customized ADC card enables the testing of ADS54J60 and clock jitter cleaners LMK04828.
The ADS54J60 is a low-power, 16-bit, 1-GSPS analogue to digital converter (ADC) with a JESD204B interface and a buffered analogue input and output.To support a wide range of signal sources and frequencies, the Card incorporates transformer linked analogue inputs. The LMK04828 delivers a JESD204B subclass 1 clocking solution that includes an ultra-low jitter and phase noise ADC sample clock, System Reference clocks, and Device Sample clock.
Length: 104 mm
Height: 149.99 mm
Thickness (+/-5%): 1.6mm
Operating Environmental Temperature: -45°c to +85°c
Data Converters
ADS54J60, Dual Channel
Sample Rate (Max) – 1GSPS
Resolution – 16
Noise floor: –159 dBFS/Hz
SNR (dB) – 70.9
ENOB (Bps) – 11.5
SFDR (dB) – 90
Input full-scale: 1.9 VPP
Input bandwidth (3 dB): 1.2 GHz
Configuration
USB(for Programming LMK) – Yes
Expansion Connectors
FMC Connectors – Yes
Clocking
Standard Clock Oscillator: Yes
Programming Clock: Yes
Power
+5V Regulator: Yes
Programmable Logic Cells: 23K
Block RAM: 1,620 Kb
DSP Slices: 3,650
Maximum IO Pins: 150
Length | 138.5mm |
Height | 92.6mm |
Thickness (+/-5%) | 1.6mm |
Operating Environmental Temperature | -45◦C to +85◦C |
JTAG | Yes |
SPI | Yes |
QSPI | Yes |
UART | Yes |
DDR3 | 4Gb (256M x 16) |
Quad-SPI Flash | 128Mb |
EEPROM | 4Kb |
IO Lines >> 100
D-Sub Connectors >> 2
Standard Clock Oscillator >> Yes
+5V Regulator >> Yes
Featuring the 4 Channel Data Acquisition Card – Zynq 700 Soc(XC7Z045-2FFG900I)
Programmable Logic Cells | 28K |
Block RAM (36 Kb Blocks) | 2.1 Mb (545) |
DSP Slices | 900 |
Look-Up Tables (LUTs) | 17,600 |
Maximum IO Pins | PS IO’s – 128 PL IO’s – 125 |